Product Introduction Ausbond? 62 is a rosin flux remover for circuit board with using the environment-friendly preparation and without containing CFC and HCFC, can fast remove the most stubborn rosin flux deposit, soldering oil and grease, smudge and casting compound etc. Fast evaporation, without any residue. Product Features 1.Safe and environment-friendly, not flammable, without CFC and HCFC. 2.Little smell, dry fast, no residue. 3.Especially applicable for removing the soldering residues of various rosin fluxes (R, RA, RMA and SA). 4.No damage to most plastics, but it is still recommended that apply it after taking small-area test. Product Application Used for removing the soldering residues on electronic parts, cleaning the printed circuit board after maintenance or assembly, and cleaning other electric devices. Process Used 1.Shake up enough before use and during use. 2. Keep the spray pot standing during use. 3. Operations from electrical devices and near to open fire are forbidden. 4. Spray evenly with distance of spray nozzle from target is 15--30cm, press the pressure valve, and spray onto the surface of the object to be treated. 5. Use intermittent spraying and painting, to loose and remove the stubborn smudge, and make the remaining liquid flow out. 6. For accurate spraying and painting, or used for the difficult-reach area, you can use the extended tubule. 7.If necessary, you can repeat the above operations until obtain the satisfying cleanness. 8. To make better protection for the circuit board during cleaning, it is recommended that use the transparent protecting paint or polyurethane insulating paint for circuit board. If you want to know more information about the product,please feel free to contact me. MSN:ausbond@ QQ:912127137 Skype:Ausbond Alibaba:ausbond E-mail:ausbondcn@