GP-2000 系列先導薄膜式蒸汽減壓
過去，先導式減壓閥在其主閥操作部主要是使用活塞， 但隨著時代
的要求，蒸汽系統的質量不斷提高，也要求減壓閥具有更高的控制
性能。GP-2000蒸汽減壓閥在其主閥操作部取代活塞， 使用膜片，
先導薄膜式提高Cv值，對一次側壓力變化和二次負荷的變動也具有
更高的控制性能。
產自特點
· {zd0}減壓比高這20: 1 ， 過去的兩段減壓現在用一段即可實現。
· 由于膜片大，又采用外部檢測構造，可以控制穩定的二次側壓力。
· 由于Cv值大，流量及控制能力的飛躍提高， 比通常的公稱通徑小
1~2個號碼的產品也可使用。
· 由于閥門為單球形，其密封性提高，滲漏量極少。
. 可管理0.02MPa以下的低壓。
GP-2000 Externally Piloted Pressure-Reducing Valves
For steam service
The GP-2000 is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high Cv, the GP-2000 is reliable and accurate (+/-1% of pressure set point from 5% to {bfb} of flow) over a long, trouble-free service life. Hardened stainless steel working parts are renewable in-line. The GP-2000 is single-seated for dead-end service, and it is available with both NPT (1/2"–2") (15–50 mm) and flanged connections in 2"–6" sizes (50–150 mm).
廣告
