Schleuniger StripCrimp SC 30 Pneumatic Stripping and Crimping machine

Schleuniger StripCrimp SC 30 Application

The pneumatic StripCrimp SC 30 is a highly reliable stripping-and crimping machine for the processing of side feed and rear feed terminals. The StripCrimp SC 30 processes all banded terminals with cross sections from 0,03-1,5 mm2 (AWG 32–16).

The machine concept incorporates a toggle press; meaning that both upper and lower parts of the applicator move towards each other. Precision stripping and gas tight crimps (certified with cross-section and test record if requested) guarantee maximum processing quality.
 

The StripCrimp SC 30 has a small footprint and compact size allowing it to be used in many working areas.

The machine follow on base Schleuniger PP3 ideas.

Additional Features

·Automatic trigger sensor for faultless operation and high cycle time

·Optional CrimpForce monitoring
·Special blades for smaller cross sections as well as thin-walled or extremely tough insulation
·Compatible to all mechanical Schleuniger PP3 tools left version and pneumatic tools KrimpSystems
 

Schleuniger StripCrimp SC 30 Technical Specifications

Wire Size                 0,03–1,5 mm2 (AWG 32–16)
Stripping Length         max. 12 mm (0.48")
Breakout Side Feed Applicator min. 15 mm (0.59") (application dependent)
Breakout Rear Feed Applicator min. 11 mm (0.43") (application dependent)
Crimp height setting         0,04 mm (optional 0,02 mm)
Reel Width (max.)         190 mm (7.4")
Reel Diameter (max.)         750 mm (29.5") / (Standard)
Production rate                 approx. 3 000 cycles/h
Air Pressure                 4 – 6 bar
Air Consumption                 1,45 NL (5 bar)
Noise Level                 < 75 dBA
Options                         CrimpForce monitoring ACO incl. software WinCrimp
                         Different Gripper type: plasma surface, for short stripping
                         Contact Oiler
Dimensions (LxWxH)         250 x 220 x 450 mm (9.9 x 8.7 x 17.7”)
Weight 16 kg (35.2 lbs.)
CE-Compatibility The StripCrimp SC 30 fully complies with the CE-guidelines
                 (mechanical safety).
Important Notice The producer recommends that wire samples be submitted
                 in cases where there is doubt as to the processing
                 capabilities of a particular machine.
Sales and Service by: Production: KrimpSystems s.r.o.,
                 Sales office:
                 SENO spol. s r.o.,
                 provozovna Pribram
                 Husova 424, CZ-261 01 Pribram VI
                 e-mail:

索鈮格Schleuniger StripCrimp SC 30相關產品
索鈮格Schleuniger全自動切斷剝皮機：EcoStrip 9300/EcoStrip 9320/EcoStrip 9380/EcoStrip 9480/PowerStrip 9550/PowerStrip 9500/MegaStrip 9650
索鈮格氣動線纜剝皮機：JS8400\JS8310\US2100\US2015\US2300\US2500\US2600/2600RI
索鈮格Schleuniger切線機：EcoCut 3200/EcoCut 3300/PowerCut 3700/ShieldCut 8100
索鈮格Schleuniger光釬剝皮機：FO7010/FS7030/UniStrip 2545
索鈮格Schleuniger半鋼性同軸電纜剝皮機SemiRigid 1050
StripCrimp 30/半自動壓接機StripCrimp 200/剝皮壓接機StripCrimp 750/StripCrimp LPC