空氣霧化噴嘴壓力輸送噴霧裝置（內混式）
噴霧噴嘴的優點和特性：
對于扇形噴霧，尺寸A、B、和C是距離噴嘴相應距離處的噴霧寬度。
從噴嘴到很大彌散點的噴霧投射總距離為D.
當使用壓力輸送液體系統時，液體通過壓力被送往噴嘴。液體和壓縮空氣或者其他氣體在內部被混合，以產生wq霧化的噴霧。
Air atomizing nozzle pressure spray device (mixed type)
The advantages of spray nozzle and features:
For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray width.
The spray from the nozzle to the maximum dispersion point projected a total distance of D.
When using pressure conveying liquid system, through the pressure to the nozzle.Liquid and compressed air or other gas was mixed in internal, to produce a fully atomized spray.
窄角高沖擊力扇形噴嘴，舌型噴嘴P系列
P或P-Z系列噴嘴很好的特點之一是能夠產生較小的具有高沖擊的扇形狀噴霧。P系列噴嘴產生的噴霧分布均勻，液滴大小中等。
P及P-Z系列噴嘴帶有外管道螺紋接頭的整體設計。大且通暢的流道極大程度的減少了 阻塞現象。經精細工藝加工而成的導流平面能夠確保均勻的、高沖擊力的扇形噴霧，噴霧形狀完整，具有清晰確定的邊緣。
一般應用：
洗滌碎礫石；
高沖擊力洗滌；
qc油漬；
水果與蔬菜洗滌；
造紙機穩紙框噴霧；
Narrow Angle high impact fan nozzle, tongue type nozzle P series
P or P - Z series nozzle can produce good is one of the features of smaller fan shape with high impact spray.P series of nozzle spray uniform distribution, droplet size medium.
P and P - Z series nozzles with the integral design of the outer pipe nipple.Big and smooth flow of maximum reduce the blocking phenomenon.Fine processing technology of diversion and plane to ensure uniform, high impact fan-shaped spray, spray shape integrity, have clearly defined edges.
General application:
Washing crushed gravel;
High impact washing;
Remove oil stains;
Fruit and vegetable washing;
Paper machine steady spray paper box;
小流量空氣霧化噴嘴BIM系列：
產生平均粒徑100micron以下之“微霧”的二流體扇形噴嘴；
對噴霧液體加0.1-0.3MAa程度之壓力的液體加壓式，有很廣的流量調整范圍；
噴霧角度60°。
產生平均粒徑30micron以下之微霧的二流體扇形噴嘴，不需要供給液體加壓裝置之虹吸式。
一般應用：
散步：脫模機、除臭劑、油、表面處理劑、防銹劑、潤滑劑、蜂蜜、防蟲劑、尿素水、其他；
冷卻：模具、氣體、鋼板、鋼片、鑄物、車體、涂裝物、玻璃板、塑膠、其他。
調濕：紙、廢氣、陶瓷、混凝土、其他
洗凈：精密基板、玻璃管、其他
Small flow air atomizing nozzle BIM series:
Below the average particle size of 100 micron 'micro fog' two fluid fan nozzle;
To spray liquid pressure of 0.1 to 0.3 degree of MAa liquid pressure type, there is a wide range of flow adjusting range;
The spray Angle 60 °.
Have an average particle size of micro fog two fluid under 30 micron fan nozzle, do not need to supply the siphon type of liquid pressure device.
General application:
Walking: stripper, deodorant, oil, surface treatment agent, anti-rust agent, lubricant, honey, pest control, urea and other water;
Cooling: mold, gas, steel plates, steel sheets, casting material, car body, coating material, glass, plastic and other.
Humidity: paper, waste gas, ceramic, concrete, other
Wash: precision base board, glass tube, the other
