P-A0、P-B0實驗室氣壓型助劑整理小軋車 

 P-A0、P-B0 small padder

用途Application

可利用此機，選擇整理助劑濃度的品質好壞．適用于染整廠、助劑、顏料制造廠。

Select the concentration quality of auxiliary ,which is applicable for dyeing and finishing plant , manufacturer of auxiliary and dye .

技術特點Features:

1.以壓縮空氣推動氣缸．使壓力均衡，且經久使用后，壓力的再現性良好。

2.羅拉目前的使用硬度72度，壓吸率在45%～90%之間適用布范圍廣，應用廣泛。

3.小軋車要比同行業安全性能佳，馬達轉動加裝正反轉功能，轉動控制可用手動或腳動來互換控制，對操作者安全．特殊裝置效率高又安全不會夾到手指。除主架外，其他均是不銹鋼制成。

1.To promote the membrane by compressing the air; make the pressure balanced .The pressure reappearance is still in good working order after long time using.

2.The hardness of roller is 72 degree and pressure-absorbing rate is from 45% to 90%.

3.With better safety and reciprocal rotating of motor ,the small padder can be operated either by hand or foot ,which makes the operator much safer . The special device with high efficiency is designed for safe operation and used to prevent the finger to be clamped. All the other parts are made of stainless steel except the framework .

技術參數 Technical Parameters

1.壓吸羅拉采用進口材料，外部被覆N，B，R，橡膠再加以精密研磨完成，硬度為邵氏72度。

2.橡膠羅拉直徑為130mm，長度為430mm。左右壓力可獨立調整，壓力范圍0-7kg。

3. 采用3相370V電機轉動，轉速可調節。

4.二組壓力指示計，二組壓力調節閥。

5.空壓機為選購設備。

6.外形尺寸L*W*H：P-AO 920*650*1250mm,P-BO  870*650*1100mm。

1.Pressure absorbing roller with 72 degree of hardness , is made of imported materials and covered by N,B,R, and rubber ; then be abraded.

2.The diameter of rubber roller is 130mm and the length is 430mm.Right and left pressure or independent adjustment with the pressure range between 0-7kg.

3.The three-phase 380V370W motor rotation,speed adjustable.

4.Group two pressure indicating meter，group two pressure adjustment valve.

5.Air compressor is an optional equipment.

6.Dimensions L*W*H(mm):P-AO 920*650*1250,P-BO  870*650*1100.