企業庫首頁>電子元器件>蜂鳴器我也要發布信息到此頁面

EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation

EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation 相關信息由 Shenzhen Jialigao Electroacoustic Mall Co., Ltd. 提供。如需了解更詳細的 EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation 的信息，請點擊 http://www.zgmflm.cn/b2b/jlgsound.html 查看 Shenzhen Jialigao Electroacoustic Mall Co., Ltd. 的詳細聯系方式。

[手機端查看]

Wang Jie(Manger)

+86-15889559416

立即咨詢

Shenzhen Jialigao Electroacoustic Mall Co., Ltd.

+86-15889559416

Shenzhen Jialigao Electroacoustic Mall Co., Ltd.

Sherry-Chen@jlg-sound.com

[店鋪小程序]

EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation圖片 EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation生產廠家

Shenzhen Jialigao Electroacoustic Mall Co., Ltd.

Shenzhen Jialigao Electroacoustic Mall Co., Ltd. 449A, Beike Building, No. 59, High-tech South Nine Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen

進入網站

詳細信息我也要發布信息到此頁面

Electrical Characteristics

Part No	EPB-12075-0527-5Ω-40P6.5 Lateral pronunciation
Rated Voltage	5Vo_p
Operating Voltage	3～5Vo_p
*Sound Output at 10cm	≥100dB(Our instrument test)
*Current Consumption	≤120mA
Resonant Frequency	2731Hz
Coil Resistance	5±2Ω
Operating Temperature	-20℃～+70℃
Storage Temperature	-30℃～+80℃
Weight	1.8g
Housing Material	Black PPO
Environmental Protection Regulation	RoHS
Welding method	Artificial welding /wave soldering

EPB-12075 Lateral pronunciation DIMENSIONS(UNIT: mm) Tolerance: ±0.5mm Except Specified

DIMENSIONS

Part No	EPB-12065-0527-42Ω-40P6.5 Lateral pronunciation
Rated Voltage	5Vo_p
Operating Voltage	4～7Vo_p
*Sound Output at 10cm	≥85dB
*Current Consumption	≤50mA
Resonant Frequency	2731Hz
Coil Resistance	42±5Ω
Operating Temperature	-20℃～+70℃
Storage Temperature	-30℃～+80℃
Weight	1.7g
Housing Material	Black PPO
Environmental Protection Regulation	RoHS
Welding method	Artificial welding /wave soldering

EPB-12065 Lateral pronunciation DIMENSIONS(UNIT: mm) Tolerance: ±0.5mm Except Specified

DIMENSIONS

RELIABLY TEST

ITEM	TESTING CONDITION	VARIANCE AFTER TEST
High Temperature Test	After being placed in a chamber with 85±2℃ for 96 hours and then being placed in natural condition for 2 hours.	Allowable variation of SPL after test: ±10dB.
Low Temperature Test	After being Placed in a chamber with -30±2℃ for 96 hours and then being placed in natural condition for 2 hours.	Allowable variation of SPL after test: ±10dB.
Humidity Test	Stored in the?temperature?humidity: 60±5℃ 90%--95% environment?for 96 hours, and then placed into?storage at room temperature for 2?hours after the?test.	Allowable variation of SPL after test: ±10dB.
Temperature Cycle Test	After being placed in a chamber with -30±2℃ for 30 minutes, products shall be placed at room temperature(25℃±10℃).After 15 minutes at this temperature, products shall be placed in a chamber at +85±2℃.After 30 minutes at this temperature, products shall be return to room temperature (25℃±10℃) for15 minutes. After 20 above cycles, products shall be measured after being placed in natural condition for 2 hours.	Allowable variation of SPL after test: ±10dB.
Drop Test	The front and side?from a height of 100mm only drop in the 4cm thickness of theboard?3 times each.	Allowable variation of SPL after test: ±10dB.
Vibration Test	After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours.	Allowable variation of SPL after test: ±10dB.
Solderability Test	Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of 260±5℃ for 3±0.5 seconds (Except the edge of terminals).	95% min. lead terminals shall be wet with solder
Continuous electricity test	Temperature: room temperature 25 ℃ Voltage: rated voltage 3 V Frequency: the rated frequency for 4.0 KHZ Time: 500 hours	Allowable variation of SPL after test: ±10dB.
Erminal Strength Pulling Test	The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds.	No visible damage and cutting off.

Typical Frequency Response Curve

TESTING METHOD

Standard Measurement conditions

Temperature:25±2℃ Humidity:45-65%

Acoustic Characteristics:

The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below

Acoustic Characteristics

In the measuring test, buzzer is placed as follows:

In the measuring test, buzzer is placed as follows

鄭重聲明：產品【EPB-12075 Lateral Pronunciation / EPB-12065 Lateral Pronunciation】由 Shenzhen Jialigao Electroacoustic Mall Co., Ltd. 發布，版權歸原作者及其所在單位，其原創性以及文中陳述文字和內容未經(企業庫www.zgmflm.cn)證實，請讀者僅作參考，并請自行核實相關內容。若本文有侵犯到您的版權，請你提供相關證明及申請并與我們聯系（qiyeku # qq.com）或【在線投訴】，我們審核后將會盡快處理。
會員咨詢QQ群：902340051 入群驗證：企業庫會員咨詢.

類似產品