The basic principle of automatic CNC lathe machining: first roughing the workpiece, removing the excess material of the workpiece, and then finishing; avoiding vibration during processing; avoiding thermal denaturation during workpiece processing, resulting in many vibrations The reason may be that the load is too large; it may be the resonance of the automatic CNC lathe and the workpiece, or the rigidity of the automatic CNC lathe may be insufficient, or it may be caused by the passivation of the tool. We can reduce the vibration by the following methods. Reduce the infeed and the machining depth, check whether the workpiece is clamped firmly, increase the speed of the tool, and lower the speed to reduce the resonance. Also, check if it is necessary to replace the new tool.

    After the parts are programmed, the test and debugging need to be carried out after the good knife. In order to prevent the error in the program and the mistake of the knife, causing the collision accident, we should first perform the idle stroke simulation processing on the coordinates of the automatic CNC numerical control lathe. In the system, the tool is translated to the right by 2 to 3 times the total length of the part; then the simulation process is started. After the simulation is completed, the program and the tool are correct, and then the part is processed. After the first part is processed, the first part is self-tested. After confirming the qualification, and then looking for a full-time inspection and inspection, after the full-time inspection is confirmed, this indicates that the commissioning is over.

   CNC lathe parts mainly include tool holders, operating parts, indexing heads, work tables, chucks, joints, chip removal devices, hoses, drag chains, protective covers, etc.

   CNC lathe tool holder, divided into cutting tools, fixtures, planers, CNC tools, and supporting systems, knife belts, broaches, cutters, hobs, gear cutters, machine saw blades, CNC cutters, chucks, punch Head, turning tool, reamer, file, pinion knife, shaving cutter, machine blade, tool holder, milling cutter, thread cutter, drill bit, tool holder, other tools, fixtures, taps, etc. CNC lathe operating parts, split wheel, handle, handle, handle, door knob, and other operating parts.