廣告
國產螺柱焊機的發展
在國內推廣普及螺柱焊接技術，除了焊接設備和焊接工藝外，還應制訂相應的標準和生產配套的螺柱、焊釘和瓷環。并盡快制訂“螺柱焊接工藝”標準，以便統一螺柱焊接工藝、質量檢驗和工程驗收。
Popularization of stud welding technology in China, in addition to welding equipment and welding process, also should formulate the corresponding standards and supporting the production of stud welding nail, and ceramic ring. And the formulation of the "process" standard welding stud as soon as possible, in order to unify the stud welding process, quality inspection and acceptance of project.
螺柱焊接技術的今后發展趨勢主要是擴大應用范圍、提高螺柱焊接自動化水平和焊接設備的更新?lián)Q代。其中硬件的發展是關鍵，即將晶閘管控制的焊接電源升級為逆變式焊接電源。
The future development trend of stud welding technology is mainly to expand the scope of application, the level of welding automation equipment and welding stud improve renewal. The hardware development is the key, the upcoming thyristor welding power supply control for inverter welding power supply upgrade.
至于焊槍的發展方向，則是電子控制。目前國內外焊槍大多是通過彈簧的伸縮來控制螺柱的升降，其可控性是相當有限的。如果采用步進電機或伺服電機控制，就可按工藝要求jq地控制螺柱的運動，焊接質量更能得到保證。
As for the development direction of the welding torch, is the electronic control. At home and abroad are mostly through the spring gun lifting telescopic to control the stud, the controllability is quite limited. If the use of a stepper motor or servo motor control, can accurately control the stud movement according to the requirement of process, the welding quality can be better guaranteed.
