久久亚洲精品国产精品777777-久久亚洲精品国产亚洲老地址-久久亚洲精品玖玖玖玖-久久亚洲精品人成综合网-亚洲视频免费在线播放-亚洲视频免费在线观看

您好,歡迎來到中國企業庫   [請登陸]  [免費注冊]
小程序  
APP  
微信公眾號  
手機版  
 [ 免責聲明 ]     [ 舉報 ]
客服電話:13631151688
企業庫首頁>資訊
行業
超級獵聘人才網 廣告

Operation specification for die casting machine

作者:JIANGMEN ZHENLI MACHINERY CO.,LTD 來源:zhenl 發布時間:2017-11-18 瀏覽:513
Operation specification for die casting machine

[die casting machine] operation standard die casting machine           

4.2 replace the molten cup punch according to the mold condition and adjust the injection and landing structure if necessary.           

4.3 look at the dynamic template to ensure that the surface has no foreign objects and no high points.           

4.4 the correct device sling, in the judgment of the safety situation lifting, and ensure that the mold into the machine before no swing, avoid collision machine tool.           

Die casting operation standard           

4.5 according to the mold status, correctly install the mold. Pay special attention to, with hydraulic core pulling mold, it is necessary to machine tool corresponding to the core pulling condition to "pick", and the core pulling in the dynamic mold, to the "lock mode" before the core; core pulling in the static mold, to the "lock mode" after the plug in the core.           

4.6 press the mould, connect the tubing and cooling water pipe to finish the die set.           

[die casting machine] operation standard die casting machine           

5. mould debugging           

After the 5.1 device is finished, the die is debugged, and the core pulling device is equipped with the core pulling device. It is necessary to pay attention to the debugging when the core is not inserted and the core of the static mould is not in place           

It is forbidden to open the mold when the die is inserted           

When the core pulling of the moving die core pulling device is not in place, the ejection is avoided           

Die casting operation standard           

5.2 it is necessary to debug the ejection stroke first, the rod is not in place, and the plug or die is not necessary.           

5.3 adjust the machine tool opening to select the appropriate clamping force.           

5.4 adjust the pressure injection and follow out stroke, check the cooling water of the punch to ensure no leakage.           

5.5 according to the die casting technology card input technical parameters.

鄭重聲明:資訊 【Operation specification for die casting machine】由 JIANGMEN ZHENLI MACHINERY CO.,LTD 發布,版權歸原作者及其所在單位,其原創性以及文中陳述文字和內容未經(企業庫www.zgmflm.cn)證實,請讀者僅作參考,并請自行核實相關內容。若本文有侵犯到您的版權, 請你提供相關證明及申請并與我們聯系(qiyeku # qq.com)或【在線投訴】,我們審核后將會盡快處理。
會員咨詢QQ群:902340051 入群驗證:企業庫會員咨詢.
免費注冊只需30秒,立刻尊享
免費開通旗艦型網絡商鋪
免費發布無限量供求信息
每天查看30萬求購信息