專業激光模切機廠家-深圳高速激光模切機廠家
激光模切機開始逐漸發展起來，它主要是利用激光的高熱能量對模切板進行高深度燒蝕形成刀縫，其割縫準直，縫寬一致，全自動化作業，成本低、效率高，是替代傳統制作模切板的{zh0}選擇，可用于各種模型的裁剪、切割，因此被廣泛應用于各行業。Laser die cutting machine started to develop, it is using laser heat energy to die cutting the deep plate, the slotted collimation, slit width is consistent, fully automated operation, low cost, high efficiency, it is the best choice   to replace traditional die cutting plate,  and it can be applied to various models of cutting, therefore widely used in various industries.
哈德勝激光模切機的優勢在于：
The advantage of HDS laser die cutting machines is
1、高品質、精度高：激光模切機屬于全自動激光切割，無震動偏差，精度高且穩定。其制作模切板由計算機控制，精度可達±0 05mm，并且不受圖形復雜程度的限制，所以切割出來的多聯板、異型板及兩邊無雜色模切板制成品非常精美。High quality, high precision, full-automatic, deviation of no vibration, high stability, its controlled by computer, the accuracy of +/- 0.05mm, and not be restricted by graphics complexity, it can cut out multigang on both sides of the plates, heterotypic plates and no noise, thee manufactured goods is very beautiful.

2、速度快、效率高：激光模切機具有大幅面、非接觸式的優點，制作模切板要比鋸床加工方式快1倍以上，生產周期短，人工成本低，生產效益高. High speed, high efficiency, laser cutting machine has a big face, the advantages of non-contact, making die cutting plate more than 1 times faster than the sawing machine, short production cycle, low labor costs, high production efficiency.
3、簡單易用：可在計算機上完成切割刀縫設計，各種刀縫參數設定基于軟件自動生成。因此，激光模切機的易學易用減少了因技工的流失或缺乏對企業正常運作的影響。
Simple and easy to use, it can be finished on computer cutting knife slit design, all kinds of knife slit set parameters based on the software automatically generated, therefore, laser die cutting machines can be use easily, all of the workers can use it after simple trained.
4、可重復加工：由于激光模切機可以存儲計算機編制的切割程序，所以當大批量生產需要多塊相同的模切板的時候，只需調出程序再進行切割，即可做到重復加工。Repeatable processing, due to the laser die-cutting machine can store computer cutting program, so when the mass production need many same die cutting board, then only need to bring up the program for cutting, the repeated processing can go ahead.



.哈德勝精密科技|||專業激光模切機廠家-深圳高速激光模切機廠家