防止電纜被鍍鋅鋼管口徑邊緣劃傷、磨損　請選用絕緣管護口!

絕緣管護口的用途：

在電纜穿線時，為防止電纜被鍍鋅鋼管口徑邊緣劃傷、磨損，用絕緣護口套在鍍鋅鋼管的兩端，保護電纜，使電纜長期處在安全、絕緣的良好狀態，避免電力事故和人員傷害。

絕緣管護口的特點：

我們有兩種材質產品。一種采用優質橡膠，柔韌度好，耐寒，耐熱使用壽命長。另一種采用優質聚丙烯原料，美觀 抗老化 耐寒 耐熱，抗腐蝕，抗劃傷。兩款均為內外雙保護設計。

絕緣管護口的型號:

DN15（4分）、DN20（6分）、DN25（1寸）、DN32（1.25寸）、DN40（1.5寸）、DN50（2寸）、  DN65（2.5寸）、DN80（3寸）、  DN100（4寸） ，DN125（5寸） DN150（6寸）鍍鋅鋼管 。

高品質絕緣管護口介紹（英文部分）

The high quality of insulating sleeve

Applications:

In order to protect the power cable  which is scratched and torn by the sharp edges of the two ends of Galvanized tube when we put the power cable through the Galvanized tube. We can put the rubber insulating sleeves on the two ends of the Galvanized tube, this technic makes

the power cable in a long-term state of insulation and safety to prevent power

failures and personal accidents.

Characteristics:

We have two kinds of products: one is

made of high quality rubber which is soft, long-service-life, cold-resistant

and heat resistant. Another one is made of high polypropylene which is heat

resistant, corrosion resistant and scratch resistant. we adopt the design which

can protect both inside and outside tubes.

Model:  DN15,DN20,DN25,DN32,DN40,DN50,DN65,DN80,DN100,DN125,DN150

  唐山市中科英華電力技術有限公司是專業生產開發電纜穿線管-管護口，穿線管管卡、不銹鋼雙片型管卡、裸銅線連接卡。的制造廠商，生產及出口業務已經開展十余年，有著豐富的生產經驗。公司同時為用戶定