該機主要用于加工大理石薄板、復合板既可把2cm板材分切成多片，也可直接用荒料切成等板。吸收了國內外同類機種的特點，造型簡潔美觀。切割進給速度采用變頻器調速，進給速度根據加工不同介質（不同硬度）而調節，設備運行平穩、效率高。采用油壓補償鋸片疲勞裝置，延長了鋸片使用壽命，保障板板平整度提高生產效率，降低生產成本。This machine is mainly used for processing marble plate,compsite boards can put 2cm sheet is cut into slices,but

also can directly use the blocks into board.At home and abroad to absorb the same types of aircraft characteristics,

simple and beautiful shapes.Cutting feed with stepless speed,feeding speed according to the processing of different

medium(hardness)and regulation,smooth operation,high efficiency.The pressure compensation device of saw blade

fatigue,prolonging the service life of saw blade,escurity sheet formation and inprove production efficiency,reduce the

production cost.

瓷磚切割機安全操作規程：

   1.沒有通過過培訓掌握操作技能不得操作切割機。若要操作要得到保管人的許可，并要有專人指導和監護。

   2.工作前勞保穿戴齊全，袖口，衣襟要扎緊。必須戴防護眼鏡，防止發生屑傷眼睛事故。

   3.在工作前要檢查各機械部件（如鋸片、臺面、螺絲、鏈條、電機、開關按鈕等）是否正常。如發現問題應報告維修班修理，排除故障后方能開機。

   4.有裂紋、不平滑、缺齒和鈍齒的鋸片不能使用。更換鋸片時必須把電源斷掉，鋸片要安裝牢靠，垂直于軸中心線，運轉時不得有跳動現象。

   5.檢查防護擋板是完整有效，不得任意拆改。活動的防護擋板不得隨意遷移。

中升機械由1996年開始附設廠于廣東省肇慶市，依然以自我開發創設“CS”品牌的石藝機械產品。同時隨著石飾不斷廣泛發展工藝需求，中昇系列產品不斷改良創新，精益求精，品質功能優良，已贏得普遍中外用戶確認，因此“CS”中升產品信譽昭著！品質與fu務誠信可靠。

By the beginning of 1996 Zhongsheng machine factory in Guangdong province with the city of Zhaoqing, is still in self development to create 'CS' brand of stone art of mechanical products. At the same time, with the continuous development of decorative stone wide process requirements, or series of product innovation and continuous improvement, excellence, quality excellent, has won widespread recognition of Chinese and foreign customers, so 'CS' or the credibility of products! Quality and service integrity and reliability.