石材拋丸除銹機

石材拋丸機：

根據不同粗糙度要求將不同粒徑的鋼丸高速射到板材表面，沖擊力巨大的鋼丸迅速把石材表面剝蝕成立體感很強的表層。用這種方法加工出來的產品，不但質量不亂，外表美觀沒有盲區，而且加工速度快，成本低。與機刨、燒毛等工藝相比，這種方法極具競爭力，在石材領域有著廣泛的應用遠景。

The products processed by this method are not only of good quality, but also have beautiful appearance without blind area, and the processing speed is fast and the cost is low. Compared with machine planing and singeing, this method is highly competitive and has broad application prospects in the field of stone.

?? ???? ???? ?? ??? ???? ?? ??? ?? ???? ? ??? ???? ?? ??? ?? ??? ?? ??? ?? ????.?? ???? ??? ??? ??? ???? ?? ?? ???, ???? ??? ??? ??, ?? ??? ???, ??? ??.?? ??, ?? ? ?? ? ?? ? ?? ? ??? ? ? ??, ?? ?? ?? ???? ?? ???? ??.

石材拋丸除銹機價格

路面拋丸機主要解決混凝土面層處理時的缺陷，它能夠一次將混凝土表面的浮漿、雜質清理qc，

并且可以對混凝土的表面進行打毛處理，使其表面均勻粗糙，大大提高了防水層和混凝土基層的黏著強度，以便防水層和橋面更好的結合，同時也能夠將混凝土的裂紋充分暴露出來，起到防患于未然的作用。

The pavement blasting machine mainly solves the defects in the concrete surface treatment, and it can clean up the floating slurry and impurities on the concrete surface once and for all.

And the surface of the concrete can be treated with hair, so that the surface of the concrete is even rough, greatly improving the adhesive strength of the waterproof layer and the concrete base, so that the waterproof layer and the bridge surface can be better combined. At the same time, the cracks in the concrete can be fully expsed.

?? ??? ?? ?? ?? ???? ?? ?, ?, ??, ???? ??? ?? ????, ?? ? ?.

, ???? ?. ??, ??? ???? ? ? ??, ?? ?? ??? ???? ?? ???, ??? ???, ?? ? ?? ?? ??.???, ???? ?? ? ?? ??? ????.

石材拋丸除銹機

作方式

工人把需要噴砂加工的接箍裝在自動噴砂機操作位的小轉盤上面、啟動自動噴砂開關、氣缸門自動打開后、大轉盤公轉把待噴砂的接箍轉到噴砂位、氣缸門自動關閉、噴沙槍開始自動上下往復式對接箍內螺紋噴砂處理、工人在操作位裝卸工件、噴砂完成后氣缸門自動打開、大轉盤公轉把噴好的產品轉到操作位、待噴的產品轉到噴砂位依次循環連續噴砂作業、生產效率高工人的勞動強度低。  

Mode of work

The workers put the hoop that needs sand blasting on the small rotary table of the automatic sandblasting machine, start the automatic sandblasting switch, the cylinder door automatically open, the large turntable turn to turn the hoop to the sand jet, the cylinder door automatically closed, the sand blasting gun began to automatically go up and down the reciprocating hoop, and the inner thread sandblasting treatment, the worker in the The operating position, loading and unloading of the workpiece, the automatic opening of the cylinder door after the completion of the sand blasting and the rotation of the large turntable turn the sprayed products to the operating position, and the products to be sprayed are transferred to the sand blasting position in order to circulate continuous sand blasting operation in turn, and the labor intensity of the workers with high production efficiency is low.

??

??? ? ?? ?? ?? ? ? ? ?? ?? ? ?? ? ?? ???? ? ? ?? ?? ?? ???, ?? ?? ? ?? ?? ?, ??? ?? ? ? ? ?? ? ? ?? ?? ? ?? ?, ??? ? ?? ??, ?? ? ?? ?? ??? ? ?? ?? ? ?? ? ?? ??, ??? ? ???? ?? ?? ??, ?? ?? ?? ? ?? ??? ? ?? ? ?, ? ?? ?? ? ? ?? ??, ?? ?? ? ?? ? ? ???? ?? ?? ??, ?? ?? ? ??? ? ?? ?? ?? ??.

石材拋丸除銹機價格